Last month we wrote about why every starter kit now leaves Pinetown marked. Since then the marking cell next to the packing benches has stopped being new. Spanners get their crew mark, case lids get their colour band, and the kits go out.
So this is the honest follow-up. We are not going to describe the machines again. This note reviews what happened after the first month: how the marks held up, how our partner AM.CO.ZA supported us, which of their short videos our packers actually watch, and which care spares we now keep on the shelf so a small problem does not hold up a Monday order.
The marks after a month: holding up
We are a tool supplier, so we tested our own work the way our customers would. Marked spanners went into a mechanic's drawer, a plumbing van and a school storeroom. They were greased, wiped with solvent and left in the coastal humidity we talk about all the time.
The fibre marks are still there and still sharp. The colour bands on the case lids are the same: good adhesion on clean lids, and you can still pick out a crew's case from across a workshop.
The one lesson was on our side. Lids that came out of the carton dusty, or were handled with greasy fingers, did not print as cleanly at the edges. Now every lid gets a quick wipe before it goes on the bed. Simple, but it is the kind of thing you only learn after a few hundred lids.
The service: what AM.CO.ZA got right
The real test of a supplier is what happens when something goes a bit wrong.
In our third week the white layer on the case lids started printing patchy on one side. We phoned AM.CO.ZA. The technician asked a few clear questions, talked us through a head clean and pointed us to the ink damper on the white channel. We swapped the damper, ran a nozzle check and the bands printed clean again. There was no need to send anything away.
That is the same kind of help we try to give our own trade customers when a kit is waiting on one part. AM.CO.ZA has branches in Johannesburg, Cape Town and Durban, and the Durban branch is the one closest to us. For bigger jobs, their engineers post installation and repair work on the Machinery Support vlog, and we read the AM.CO.ZA online guide before we phone.
Our verdict on service: practical, clear and honest about what we could fix ourselves.
The videos our packers actually watch
When someone new joins the packing bay, we do not hand them a manual. They sit down with three short clips from AM.CO.ZA's YouTube channels. Here is our review of each.
1. Marking hand tools with a fibre laser
Watch: Mark Your Tools With a LabelMark Fiber Laser Marking Machine
This is the one that explains the idea. It shows ordinary hand tools getting a permanent mark, which is exactly our job. New packers understand in a few minutes why we mark tools at all. What we would add: a word about jigs. We hold every spanner in the same simple jig so the mark lands in the same place on every tool in a kit.
2. Focus and the red preview
Watch: LabelMark Alignment Guide, Focus, Size, Distortion and Red Preview
This is the clip that saves us scrap. It explains focus and the red preview light, which shows where the mark will go before the laser fires. New staff tend to want to press start straight away; after this video they check the red outline first. We watch it twice: once at induction and again after the first week.
3. UV printer head height and white options
Watch: Flatbed 6090 UV Printer Basic Settings, Head Height and White RIP Options
Our case lids are not all the same height, so head height matters. This clip covers it, along with the white ink options we use under the colour bands. What we would add: a short care routine at the end. We built our own, below.

The care spares we now keep on the shelf
After the white-channel scare, our technical team put together a small care shelf for the marking cell. It is the same thinking as our consumables replenishment service for trade customers: keep the fast-wearing items close so nobody waits.
Everything below came from AM.CO.ZA's online store, Buythis:
- A spare set of UV-resistant ink dampers for the printheads. This is the part we swapped in week three.
- UV printhead wet wipes and hybrid UV ink cleaner for the end-of-day clean around the heads and the capping area.
- Microfibre machine cloths for lint-free cleaning of the printer and the marker's work table.
- Cleaning swabs for printheads and the capping station.
- 10 µm capsule ink filters for the white ink line, the colour that needs the most care.
- A spare printhead cap kit for the I1600 heads, because a worn cap means a dry head.
It is the same advice we give our customers: buy quality the first time, then look after it.

Something new for learner sets: aluminium case tags
One good idea came out of the month. Teachers asked for a way to name a case without writing on the lid. We now mark matte black anodised aluminium card blanks (about 55 × 85 mm, also available in glossy black) on the same fibre marker and clip them to the case handle. The tag carries the same symbol as the tools inside, so a learner can match case, tag and tools at a glance.
It fits straight into the tool control routine for school labs we recommend, and it is the kind of detail we looked at when we fitted out the Westville school lab.

Training: from our packing bay to your apprentices
What works for our packers also works for our customers. We now use the same clips in our on-site tool inductions when a team receives marked kits, and keep the talk short, in the spirit of toolbox talks that work.
For apprentices who want to go further than a ten-minute clip, we point them to Ambitious Academy, the training school linked to AM.CO.ZA. It has online courses you can do at your own pace, and its Machine Class adds skill assessments and certifications. We wrote more about that in how to train new apprentices.
Our scorecard after one month
| What we reviewed | Our view |
|---|---|
| Fibre marks on steel tools | Still sharp after grease, solvent and damp. |
| UV colour bands on case lids | Good, as long as the lid is wiped clean first. |
| AM.CO.ZA service and support | Clear, practical answers by phone. |
| AM.CO.ZA YouTube clips | Short and useful. Our induction is built around three of them. |
| Care spares from Buythis | Easy to order, and having them on the shelf takes the stress out. |
| Training through Ambitious Academy | A good next step for apprentices who want the theory. |
Bottom line: after a month of real kits, the support after the sale is the part we value most.
Want marked kits or a marking induction?
Ask us about marked starter kits and learner sets, or book a session through training enquiries. If a marked tool goes missing, our tool replacement matching service finds a like-for-like replacement and we mark it to match the rest of the kit. Kits are built to your list, so ask for a quote.





